Loading tools…
A workspace keeps the job in one record you can reopen — the address, its takeoff with the source named, and the bid draft you price from it.
Save this job to a workspace14 days free, no card. Pay when you're ready.
Takeoff planning · supplier verification required
Translate geometry, pitch, waste, roof type, and regional rates into a planning draft—not a purchase order.
Build a draft material list from dimensions, pitch, roof type, accessories, waste, and regional assumptions. This is a planning tool, not a purchase order: verify measurements, code requirements, availability, and supplier pricing before relying on the output.
Commercial path
Included with MyRoofGenius workflows
Output
Editable draft material list
Pricing
Assumptions to verify
Next step
Estimate and report review
No completed Roof Measure area found
Measure a roof, then return here to import its area.
Footprint is the outline seen from above, in feet. The pitch below turns it into roof surface.
Already know the roof surface? 1 square = 100 sq ft. It is used as entered, with no pitch factor.
1,200 sq ft footprint × 1.118 (6/12 pitch) = 1,342 sq ft roof surface (13.4 squares)
Optional lineal measurements
Optional — leave 0 if unknown. Do not repeat the roof area, length, or width in every field.
Enter the roof configuration and calculate to produce a draft material list. The output will show quantities, material assumptions, estimated cost, weight, delivery load count, and review notes.