Explore sample outputs and workflow previews. Samples use demo inputs; PM and finance previews describe existing workflows without displaying customer data. Pick your role and see the work.
Bid faster. Bid with clearer assumptions.
Upload field photos and review sourced takeoff drafts with material specs and editable cost breakdowns.
Sourced Takeoff
Denver, CO 80216
Commercial -- Flat Roof Warehouse (22,400 sq ft)
Generated
MYROOFGENIUS-2026-04182
March 14, 2026
Total Area
22,400 sq ft
Squares
224.0
Pitch
1/4 : 12 (Low Slope)
System
EPDM Single-Ply
Edge Perimeter
612 linear ft
Penetrations
18
Drains
8
Deck
Steel w/ polyiso
Illustrative quantities and prices; each line rounds to whole dollars before summing.
| Item | Qty | Unit | Total |
|---|---|---|---|
| 60-mil EPDM Membrane (Firestone) | 46 rolls | $357.00/roll | $16,422 |
| Polyiso Insulation (3 in, R-18) | 22,400 sq ft | $1.45/sf | $32,480 |
| EPDM Edge Metal (24 ga) | 612 lf | $5.10/lf | $3,121 |
| Pipe Boot Flashings | 18 ea | $38.00/ea | $684 |
| Bonding Adhesive Pails | 18 ea | $96.00/ea | $1,728 |
| Seam Sealant Tubes | 32 ea | $16.00/ea | $512 |
PM and finance previews contain no customer data. Other outputs are illustrative sample output generated with demo inputs. Actual results are based on your uploaded photos, regional pricing, and project-specific parameters.
Why you can trust the numbers
The deterministic tools give the same answer for the same inputs, every time, and the formulas are published so you can check the work yourself.
100% reproducible
Same inputs → same answer
Identical inputs return the identical result. No model drift, no random output.
7 free tools
Deterministic, no AI required
Cost, material, labor, cash-flow, change-order, and configurator tools run from your numbers.
USGS 3DEP
LiDAR path when coverage exists
Address entry adds open footprint and imagery context. USGS 3DEP LiDAR is used when available.
Open methodology
Every formula is documented
Squares, waste, pitch, perimeter, and regional roll-up are shown so you can check the output.
Roofing squares
squares = roof area ÷ 100One roofing square = 100 sq ft. Material quantities roll up from that unit.
Material base cost
component quantity × component unit cost × waste factorMaterial lines stay tied to visible component quantities, not a blended bid shortcut.
Pitch adjustment
labor × pitch multiplier (by rise/run)Steeper roofs cost more to install. The labor multiplier is visible.
Drip-edge perimeter
perimeter = 2 × (length + width)Eave and rake metal use a visible footprint approximation you can check.
Regional + tax roll-up
subtotal × regional multiplier, then × tax rateRegional cost and tax are applied openly after component subtotals are visible.
Provider-backed AI features are currently unavailable. The calculations above use explicit inputs and repeatable rules. Review the inputs and results before use.
Start from a property address and get the roof analysis, estimate, and review you just previewed. On paid plans, field photos add supporting evidence to a measured takeoff; they do not replace it. 14-day free trial, cancel anytime.
14-day free trial Cancel anytime